INSPECTION
1 BROWN & SHARPE CMM GAGE 2000 STATUS. (SHOWN ABOVE)
1 STARRETT-SIGMA OPTICAL MEASURING PROJECTOR WITH QUADRA-CHECK 2000 READOUT.
1 MITUTOYO ELECTRONIC SURFTEST SJ-201 SURFACE ROUGHNESS TESTER.
2 STARRETT GRANITE SURFACE PLATES.
3 GAGE-BLOCK SETS:
2 SETS (SHOP USE ONLY)
1 SET (INSPECTION DEPT.)
4 PIN GAGE SETS (SHOP USE ONLY)
1 PIN GAGE SET from .005 TO 1.000. 1 STARRETT 36" X 36" 2 LEDGE PLATE GRADE A
DIGITAL MEASURING TOOLS.
MICROMETERS-STARRETT from 1" TO 14".
VERNIERS-STARRETT AND BROWNE & SHARPE from 6" TO 18".
THREAD GAGES:
(ALL RING AND PLUG GAGES AVAILABLE FOR CHECKING THREADS).
CALIBRATION PER MIL-STD-45662.
INSPECTION PER MIL-I-45208.
QUALITY ASSURANCE MANUAL AVAILABLE UPON REQUEST.
|
